2gbaroinputworkaround
Differences
This shows you the differences between two versions of the page.
| Next revision Both sides next revision | |||
|
2gbaroinputworkaround [2008/01/23 07:47] 76.100.119.159 created |
2gbaroinputworkaround [2008/01/24 07:22] twdorris |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Overview ====== | + | ====== Overview - 2G Baro Input Workaround ====== |
| When using something like a MAF translator that allow using DSMLink's Ignore IAT/Baro feature, the ECU's baro sensor input can be used for some aftermarket sensor such as a MAP sensor or a wideband O2 sensor. However, the baro input of the 2G ECU may not be compatible with the aftermarket sensor. The 2G ECU has a 3.3K ohm pull-down resistor (R39). This may put more load on the sensor than it can tolerate and still put out a proper signal. For example, a GM 3-bar sensor can only drive this input to 1.76 volts at maximum pressure. The new Delphi sensor seems to have a bit lower output impedance and will drive the 2G baro input to a little higher voltage at maximum sensor pressure, but it's still unsuitable. | When using something like a MAF translator that allow using DSMLink's Ignore IAT/Baro feature, the ECU's baro sensor input can be used for some aftermarket sensor such as a MAP sensor or a wideband O2 sensor. However, the baro input of the 2G ECU may not be compatible with the aftermarket sensor. The 2G ECU has a 3.3K ohm pull-down resistor (R39). This may put more load on the sensor than it can tolerate and still put out a proper signal. For example, a GM 3-bar sensor can only drive this input to 1.76 volts at maximum pressure. The new Delphi sensor seems to have a bit lower output impedance and will drive the 2G baro input to a little higher voltage at maximum sensor pressure, but it's still unsuitable. | ||
2gbaroinputworkaround.txt ยท Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
