direct_access_changes
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
direct_access_changes [2016/10/30 06:25] twdorris [Single value files] |
direct_access_changes [2016/10/30 06:36] twdorris [Installing the file] |
||
|---|---|---|---|
| Line 15: | Line 15: | ||
| - | __Windows Vista/Windows 7:__ \\ | + | __Windows Vista/Windows 7/8/10:__ \\ |
| C:\Users\<username>\ecmlink\resources\records | C:\Users\<username>\ecmlink\resources\records | ||
| Line 36: | Line 36: | ||
| Simply change the one cell in these tables to "0" to disable the corresponding function and hit Save to ECU. | Simply change the one cell in these tables to "0" to disable the corresponding function and hit Save to ECU. | ||
| + | |||
| + | |||
| + | //(You may need to right-click on the file and select "Save link as" to download these files to your computer)// | ||
| Line 46: | Line 49: | ||
| |"VTEC" disable |{{:novtece3.properties|novtece3.properties}} |The early EVO ECUs have a "special" mode of operation above 5500 RPM at full throttle where the ECU kicks in a slightly lean mixture while simultaneously bumping up the boost target and base WGS duty cycle. For lack of a better name, we're jokingly referring to this as a factory "VTEC" mode. You can disable this operation by setting the value in this table to 0. Set the value to 1 to enable it. (EVO1-3 only) | | |"VTEC" disable |{{:novtece3.properties|novtece3.properties}} |The early EVO ECUs have a "special" mode of operation above 5500 RPM at full throttle where the ECU kicks in a slightly lean mixture while simultaneously bumping up the boost target and base WGS duty cycle. For lack of a better name, we're jokingly referring to this as a factory "VTEC" mode. You can disable this operation by setting the value in this table to 0. Set the value to 1 to enable it. (EVO1-3 only) | | ||
| - | |||
| - | \\ | ||
| ===== Single value files ===== | ===== Single value files ===== | ||
| Line 53: | Line 54: | ||
| These are single-value files. You simply change the value in the table to the new value you want. | These are single-value files. You simply change the value in the table to the new value you want. | ||
| + | |||
| + | |||
| + | //(You may need to right-click on the file and select "Save link as" to download these files to your computer)// | ||
| Line 60: | Line 64: | ||
| |Engine prime 1g |{{:engineprime-1g.properties|engineprime-1g.properties}} |1G DSM version of the above. (1G only) | | |Engine prime 1g |{{:engineprime-1g.properties|engineprime-1g.properties}} |1G DSM version of the above. (1G only) | | ||
| + | |||
| + | \\ | ||
| ===== Direct code modifications ===== | ===== Direct code modifications ===== | ||
| - | __**NOTE/WARNING/DISCLAIMER:**__The files in this section are basically pushing raw code into the ECMLink firmware. If you type a single number wrong, you could easily cause the ECU to reset. And that's the best case scenario because ECMLink has a built-in failsafe for that type of error. The worst case scenario is that you somehow manage to type in a wrong number that doesn't reset the ECU but does introduce some undesirable side effects that may not even be obvious until you're powering down the track at full boost! | + | __**NOTE/WARNING/DISCLAIMER:**__The files in this section are basically pushing raw code into the ECMLink firmware. If you type a single number wrong, you could easily cause the ECU to reset. And that's the best case scenario because ECMLink has a built-in failsafe for that type of error. The worst case scenario is that you somehow manage to type in a wrong number that doesn't reset the ECU but does introduce some undesirable side effects that may not even be obvious until you're powering down the track at full boost! |
| + | |||
| + | |||
| + | {{ :direct-access-code-mod.png?direct&185x63}}Each cell value you enter must match the value in the header above that cell. An example is provided to the right. Each cell value is identical to the header above it. | ||
| - | <font 12.8px/arial;;#000000;;#ffffff>Each cell value you enter must match the value in the header above that cell. An example is provided to the right. Each cell value is identical to the header above it.</font> | + | EDIT CAREFULLY AND __DOUBLE CHECK__ THE VALUES YOU ENTER BEFORE HITTING THE SAVE-TO-ECU BUTTON!! You have been warned. |
| - | EDIT CAREFULLY AND __DOUBLE CHECK__ THE VALUES YOU ENTER BEFORE HITTING THE SAVE-TO-ECU BUTTON!! You have been warned. | + | //(You may need to **right-click** on the file and select "Save link as" to download these files to your computer)// |
| ^Name ^File ^Description | | ^Name ^File ^Description | | ||
| - | |No Knock 1G |[[http://www.ecmtuning.com//usr/local/www/dokuwiki/lib/plugins/ckgedit/fckeditor/userfiles/file/noknock1g.properties|noknock1g.properties]] |Disables the knock retard function but still allows the value to be logged. (1G only) | | + | |No Knock Retard |{{:noknock1g.properties|noknock1g.properties}} |Disables the knock retard function but still allows the value to be logged. (1G only) | |
| + | |::: | {{:noknock2g.properties|noknock2g.properties}} |2G version of above | | ||
| + | |::: | {{:noknocke3.properties|noknocke3.properties}} |EVO1-3 version of above | | ||
| \\ | \\ | ||
direct_access_changes.txt · Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
