Basics: If you have a non-EPROM 1G (1990-1994) DSM ECU and would like to have that ECU converted to an EPROM model, we can do it! We have engineered our own boards for this and do the work ourselves here at the shop. You can expect the same professional results as with everything else we do.

To get an idea of what's involved in this conversion process, hop over to our non-EPROM conversion page on the wiki for a step-by-step overview.

Discount:If you're going to buy an ECMLink package at the same time, please note that there is a discounted price for this conversion listed on the ECMLink package page in the Socket/conversion option near the bottom.

Ordering process: You will place this order first, then ship us the ECU along with a printed copy of this order. We'll look it over, do the work, and return the ECU using whichever shipping method you chose with this order. That means the shipping method you choose with this order is the method we'll use to ship the ECU back to you!

Shipping to us: The shipping address where you will send your ECU can be found on our contacts page. Please be sure to include a copy of this order in your package with the ECU!

Additional charges:1G ECUs show up here with pre-existing issues and problems very often. Please be aware that if we have to do a repair on the ECU first to restore it to proper operation, some additional charges may apply. If you'd like to look your ECU over carefully and check for any potential issues, we have an ECU repair page that will help.

V2 compatibility:Please note that this conversion is NOT compatible with our older V2 memory board offering.