ECMTuning - wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<h1>Overview</h1> <div class="level1"> <p> If you remove both side honeycombs and the one lower honeycomb (leaving the center in place) on a 2G MAF, you need to adjust for this in the MAF compensation dialog in DSMLink. The table below lists the values you would use for a typical setup. Note for 1G guys that you will need to select "2G MAF" as your base MAF type first. The following compensation values are based on the assumption that the ECU is configured for a 2G MAF. </p> </div> <h1>Details</h1> <div class="level1"> <span class='np_break'> </span> <div class="table"><table class="inline"> <thead> <tr class="row0"> <th class="leftalign"> Freq </th><th class="col1"> Adj </th> </tr> </thead> <tr class="row1"> <td class="rightalign"> 50hz</td><td class="col1"> +48%</td> </tr> <tr class="row2"> <td class="rightalign"> 150hz</td><td class="col1"> +30%</td> </tr> <tr class="row3"> <td class="rightalign"> 250hz</td><td class="col1"> +25%</td> </tr> <tr class="row4"> <td class="rightalign"> 400hz</td><td class="col1"> +22%</td> </tr> <tr class="row5"> <td class="rightalign"> 800hz</td><td class="col1"> +17%</td> </tr> <tr class="row6"> <td class="col0"> 1200hz</td><td class="col1"> +13%</td> </tr> <tr class="row7"> <td class="col0"> 1600hz</td><td class="col1"> +13%</td> </tr> <tr class="row8"> <td class="col0"> 2000hz</td><td class="col1"> +13%</td> </tr> <tr class="row9"> <td class="col0"> 2400hz</td><td class="col1"> +13%</td> </tr> </table> <span class='np_break'> </span> </div> </div>