This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
evo8v3settings [2010/02/15 08:15] twdorris |
evo8v3settings [2013/06/04 12:18] twdorris |
||
---|---|---|---|
Line 4: | Line 4: | ||
===== EVO8 injectors ===== | ===== EVO8 injectors ===== | ||
If you're running EVO8 injectors with your ECMLink-equipped ECU, here are some numbers you can use to get the ECU configured to match identically with the EVO8 ECU itself. | If you're running EVO8 injectors with your ECMLink-equipped ECU, here are some numbers you can use to get the ECU configured to match identically with the EVO8 ECU itself. | ||
+ | |||
+ | |||
+ | |||
Line 14: | Line 17: | ||
==== Fuel Adjustments Table ==== | ==== Fuel Adjustments Table ==== | ||
- | In "ECU config" on the "Fuel" tab, set Global fuel to **-17.6%** and then set deadtime to 0 usecs. This assume you're running stock fuel pressure for your ECU. If you're running a 1G DSM ECU, that means 37 psi. If you're running anything other ECU, that means 42.6 psi. If you're running a non-stock fuel pressure, you'll need to adjust the global fuel scale accordingly. | + | In "ECU config" on the "Fuel" tab, set Global fuel to **-17.6%** and then set deadtime to 0 usecs. This assume you're running stock fuel pressure for your ECU. If you're running a 1G DSM ECU, that means 37 psi. If you're running any other ECU, that means 42.6 psi. If you're running a non-stock fuel pressure, you'll need to adjust the global fuel scale [[fuelsettingshelp|accordingly]]. |
- | **V3Lite note**: V3Lite does not provide a "Fuel" tab. Instead, you'll go into the InjectorComp tab in direct access and enter fuel flow rate instead. For EVO8 injectors running at 42.6 psi (stock), you'll want to use **540 cc/min**. Yes, I know, everyone says these are 560 injectors. The EVO8 ECU disagrees. It says they are 546 cc/min and when adjusted for stock fuel pressure (42.6), these flow 540 cc/min. If you have a 1G and are running 37psi base, then you'll use 546 * sqrt(37/43.5) = **504 cc/min** instead. | ||
==== InjBatteryAdj ==== | ==== InjBatteryAdj ==== | ||
Line 22: | Line 25: | ||
^Volts^usecs^ | ^Volts^usecs^ | ||
- | | 7| 2235| | + | | 7| 2295| |
- | | 9| 1380| | + | | 9| 1400| |
- | | 12| 900| | + | | 12| 890| |
- | | 14| 570| | + | | 14| 690| |
- | | 16| 345| | + | | 16| 555| |
- | | 19| 195| | + | | 19| 495| |